Hammer mills

Multi-purpose milling

Toper’s TRY hammer mills are used for milling a very wide variety of products, and area of use expands by optional accessories.

Hammer mills can be driven by electric or fuel motor as well as PTO.

TRY mills can be used indoors, at production facilities as well as outdoors, on croplands (fields) with their wide drive options.

Some advantages of Toper TRY mills are:

  • Advanced No-Dust Release filter system
  • High capacity milling up to 2.5 tons/h
  • Multiple grain sizes on a single milling session
 

Standart features & equipment

  • Multiple drive options (electric, fuel or PTO)
  • Mobile version (TRY - 20)
  • High performance filter system which prevents dust release while operating
  • 4 different grain sizes in a single session with 4 sieves

Milling range includes:

  • Legumes (Chickpeas, Lentils, Horsebeans, etc.)
  • Cereals (Wheats, Barley, Oats, Ryes, Corn on the cob, etc.)
  • Flour (Fine white flour, Soy flour, etc.)
  • Spices (Cummin, Red peppers, Black peppers, Cinnamon, Ginger, Pimento, etc.)
  • Dried Food (Dried vegetables, Dried fruits, etc.)
  • Dried Plants (Dry clover, Straw, etc.)
  • Animal Feed (Sunflower head, Corn on the cob, Ling seed, Vetch, Soy, Kernel, etc.)
  • Minerals (Soil, Clay, Lime, Borax, etc.)
  • Materials (Hazelnut shells, Wood chips, etc.)
 
Toper hammer mill technical drawing, blueprint

Technical drawing is a general blueprint of the product series and it is for illustrative purposes only. Please contact Toper for the exact technical drawing of the model of your choice.

TIS Series

  TRY 20 Mobile TRY 20 TRY 26 TRY 38
Nr. of hammer knives 20 26 38
Milling capacity (kg/h) 450 - 700 1,200 - 1,700 1,700 - 2,500
Dimensions (W-H-D) cm 125 x 160 x 185 134 x 177 x 225 175 x 198 x 240
Weight (for electric driven mills) (kg) 250 350 500
Voltage 220 - 380 - 415V (3PH)
Frequency 50 - 60 Hz
Power drive options Electric, Fuel, PTG
Power requirement (A) 13.5 26.5 37.6
Standards MD 2006/42/EC, LVD 2006/95/EC, EN 291-1:1991, EN 292-2:1995, EN 294:1992, EN 6020-1:1997, EN 1050:1996
Notice Capacity values are for 3 mm Ø grain size. Output may vary due to product kind and milling type.